- Home
- ยป
- Products & Services
- »
- Calibration Service
Calibration Service
or from NABL Website:
•www.nabl-india.orgFlow Meter Calibration Service
Minimum Order Quantity: 1 Number
View Brochure
Service Location | At Site or In Lab |
Service Type | Liquid non hazardeous |
Measurement Range | >700 PSI |
Industry Type | Process Industry |
Number Of Flow Meters | 10 |
Calibrated For | Customer Requirement |
Calibration Interval | 6 Months |
online/offline | online |
Mass flow | Mass and Volume flow |
Flow meters are devices used to measure the rate of flow of liquids or gases in pipelines. Calibration of flow meters is essential to ensure that the readings obtained from the device are accurate and reliable.
Here are the steps we follow to calibrate a flow meter:
-
Prepare the flow meter for calibration. Clean the flow meter and remove any debris that may interfere with the accuracy of the readings. Make sure the flow meter is installed in the pipeline, and the necessary valves are open.
-
Select a suitable calibration fluid. The fluid should have a known density and viscosity, and its properties should be similar to the fluid that the flow meter is designed to measure. The fluid should also be chemically compatible with the flow meter components.
-
Set up a flow loop. A flow loop is a closed circuit that circulates the calibration fluid through the flow meter. The loop should include a pump, a tank to hold the calibration fluid, and a measuring device to monitor the flow rate.
-
Establish a stable flow rate. Use the pump to circulate the calibration fluid through the flow meter at a constant flow rate. Wait until the flow rate stabilizes before taking measurements.
-
Take measurements. Record the readings from the flow meter and the measuring device at the same time. Take multiple readings at different flow rates to ensure accuracy. Repeat this process several times to obtain a reliable average value.
-
Analyze the data. Compare the flow meter readings with the measuring device readings to determine the flow meter's accuracy. If the readings are not consistent, adjust the flow meter or replace any components that may be causing the discrepancies.
-
Document the calibration. Record the calibration results, including the calibration fluid used, the flow rates, and the flow meter readings. Document any adjustments made to the flow meter.
By following these steps, we calibrate a flow meter and ensure its accuracy. Regular calibration is necessary to maintain accurate readings and detect any errors or problems with the flow meter.
Additional Information:
- Item Code: FMC
- Production Capacity: 10
- Delivery Time: 2 weeks
- Packaging Details: wooden
Vibration Meters Calibration Service
Minimum Order Quantity: 1 Piece
View Brochure
Instrument Type | Laboratory Instrument |
Service Location | At Site or In Lab |
Calibrated For | Manufacturer |
Number Of Instruments | 1 |
Mode Of Report | Hard Copy |
Industry Type | Laboratory |
Thermal Instrument Name | vibration meter |
Service Charge | 1000 |
Calibration Interval | One Time Requirement |
A vibration meter is a device used to measure the vibration levels of machines and structures. Calibration of a vibration meter is important to ensure that it provides accurate and reliable measurements. Here are the steps to calibrate a vibration meter:
-
Prepare the vibration meter for calibration. Make sure the battery is fully charged, and the device is functioning properly. Remove any protective covers and attachments.
-
Select a suitable calibration source. The calibration source should produce a stable and known vibration level at a specific frequency. The calibration source can be a vibration shaker, an accelerometer, or a reference standard.
-
Mount the vibration meter on the calibration source. Attach the vibration meter to the calibration source using a mounting adapter or magnetic base. Ensure that the vibration meter is securely attached and properly aligned.
-
Set the calibration frequency and amplitude. Set the calibration frequency and amplitude to match the specifications of the vibration meter. Use a frequency generator or a computer program to generate the desired signal.
-
Record the readings from the vibration meter. Turn on the vibration meter and record the readings from the device. Take multiple readings at different frequencies and amplitudes to ensure accuracy. Repeat this process several times to obtain a reliable average value.
-
Analyze the data. Compare the readings from the vibration meter with the calibration source readings to determine the meter's accuracy. If the readings are not consistent, adjust the vibration meter or replace any components that may be causing the discrepancies.
-
Document the calibration. Record the calibration results, including the calibration source used, the frequency and amplitude settings, and the vibration meter readings. Document any adjustments made to the vibration meter.
By following these steps, you can calibrate a vibration meter and ensure its accuracy. Regular calibration is necessary to maintain accurate readings and detect any errors or problems with the vibration meter
Additional Information:
- Item Code: VMC
- Production Capacity: 10
- Delivery Time: 2 weeks
- Packaging Details: wooden
Electrical Equipment Calibration Service
View Brochure
Calibration Interval | 3 Months |
Electrical Equipment Name | Ammeter |
Service Location | In Laboratory |
Service Mode | Off Line |
Service Duration | 2 or 3 days |
Specific Gravity Hydrometer Calibration
Minimum Order Quantity: 1 Piece
View Brochure
Length | 24 inches max |
Country of Origin | Made in India |
Medium | Alcohal |
MOC | Glass and Steel |
Offline/Online | Online |
A hydrometer is a device used to measure the density of liquids. It typically consists of a glass or plastic tube with a weighted bulb at the bottom and a graduated scale on the side. Hydrometers are used in a variety of applications, including testing the specific gravity of beer, wine, and other liquids.
Hydrometers need to be calibrated to ensure their accuracy. Calibration is the process of comparing the readings of a device to a known standard to determine its accuracy. In the case of hydrometers, calibration involves checking the accuracy of the graduated scale.
Here are the steps to calibrate a hydrometer:
- Fill a container with distilled water at a known temperature (usually 20°C).
- Place the hydrometer in the water and let it settle.
- Adjust the hydrometer to read zero by turning the adjustment screw at the top of the hydrometer or by tapping the hydrometer until it reaches zero.
- Check the graduations on the hydrometer against the known values for the water temperature. These values can be found in a table of specific gravity values for water at different temperatures. Make note of any discrepancies.
- Adjust the hydrometer as needed by gently bending the stem. Only small adjustments should be made.
- Repeat steps 1-5 until the hydrometer readings match the known values for the water temperature.
Once your hydrometer is calibrated, it should be accurate for measuring the specific gravity of liquids at the calibrated temperature. It's important to note that hydrometers can become damaged or inaccurate over time, so regular calibration is recommended to ensure accurate readings.
Additional Information:
- Item Code: calibrationservice
- Production Capacity: 100
- Delivery Time: 2 week
- Packaging Details: wooden
Energy Meter Calibration Services
View Brochure
Calibration Interval | One Time Requirement |
Energy Meter Type | Electromechanical Induction |
Number Of Energy Meters | 5 |
Location | Client Site |
Service Mode | Off Line |
Energy meters are the most important part of any electrical system. The revenue of the utilities is dependent on the measurement of the energy consumed. Accurate measurement is essential. With the stress on energy conservation, it is more important now to account for the energy being consumed by each and every machine in the industry. Hence energy meters are being designed to become more and more intelligent. The Government of India has decided to install meters in all the consumer's premises. In view of this, it is very important to check the quality and reliability of energy meters so that their performance is satisfactory to enable accurate billing of electricity consumption. Earlier electro-mechanical meters having accuracy of class 1.0 and 2.0 were used but with the advancement of technology, static energy meters having accuracy class of 0.5 and 0.2 are available in the market.
BAPL has been carrying out testing and calibration of energy meters since the last 15 years. BAPL has complete type test facilities for testing energy meters as per Indian and International Standards. BAPL can also calibrate 0.05 class reference energy meters using 0.02 class reference energy meter.
Major Attractions
- Complete type test facilities for testing energy meters and transducers as per Indian and International Standards.
- Test facility up to 200 A for energy meters is accredited by NABL
- Calibration of 0.05 class reference energy meters using 0.02 class reference energy meter
- Special and tamper tests according to requirements of utilities
- Independent third party inspection agency for disputed energy meters
- Calibration of energy meters at site/mobile laboratory using 0.05 class reference meters
- Evaluation of energy meters as per the requirements of electricity boards and ranking them according to quality
- Durability & Accelerated Reliability Testing of Energy Meters as per IEC/EN Standards
Energy Meter testing
Energy Meter testing
Mechanical Instrument Calibration Services
Minimum Order Quantity: 1 Instrument
View Brochure
Mechanical Instrument Name | Micrometre |
Instrument Type | Measuring Instrument |
Calibrated For | Industrial |
Number Of Instruments | 1 |
Mode Of Report | Hard Copy |
Industry Type | all |
Thermal Instrument Name | pH Meter |
Service Charge | 500 |
Customization | Customised |
Calibration Interval | Yearly |
Weighing Balance Calibration Service
Minimum Order Quantity: 1 Number
View Brochure
Service Location | all india |
Weighing Balance Type | Laboratory Balance |
Number Of Units | 1 |
Calibrated For | End User |
Calibration Interval | Yearly |
Calibration Service Level | Certificate with Uncertainties |
Location | Site |
Technology | NABL |
Instruments To Be Repaired | No |
Weighing balance calibration is the process of ensuring that a weighing balance is accurately measuring the weight of an object. Calibration services are important for ensuring that a weighing balance is providing accurate and reliable measurements.
There are several companies that offer weighing balance calibration services. When selecting a calibration service provider, it is important to choose a company that is reputable and has experience in calibrating weighing balances. Bharti calibration lab is accredited by NABL so the International Organization for Standardization (ISO).
During the calibration process, the weighing balance is tested against known weights to determine if it is providing accurate measurements. We will typically perform a series of tests and adjustments to ensure that the weighing balance is operating within acceptable tolerances.
After the calibration process is complete, we will provide a calibration certificate that documents the results of the calibration tests. This certificate should include information about the calibration standards used, the date of the calibration, and the results of the calibration tests.
Regular calibration of weighing balances is important for ensuring that they continue to provide accurate measurements over time. Calibration intervals will depend on the specific application and the manufacturer's recommendations, but many companies choose to have their weighing balances calibrated annually or semi-annually.
Additional Information:
- Production Capacity: 100
Instruments Calibration Services
Instrument Type | Laboratory Instrument |
Calibrated For | Industrial |
Mode Of Report | Offline |
Thermal Instrument Name | Blood Chemistry Analyzer |
Calibration Interval | One Time Requirement |
Instrument Calibrations Services
Instrument Type | Laboratory Instrument |
Calibrated For | Industrial |
Mode Of Report | Offline |
Thermal Instrument Name | Blood Chemistry Analyzer |
Calibration Interval | One Time Requirement |
NABL Accreditation
Minimum Order Quantity: 1 Certificate
Service Location | all india |
Location/City | Pan India |
Usage/Application | Testing and Aviation |
Standard Certificate | CE |
Service Type | Certificate Provider |
Approved Service | Yes |
Mode Of Report | Hard Copy |
NABL (National Accreditation Board for Testing and Calibration Laboratories) is an autonomous body under the aegis of the Department of Science and Technology, Government of India. NABL provides accreditation services to testing and calibration laboratories in various fields such as chemical, biological, mechanical, electrical, and thermal.
Accreditation by NABL signifies that a laboratory has met the stringent requirements of international standards for quality and competence, and is capable of producing reliable and accurate results. NABL accreditation is recognized both nationally and internationally, and is a sign of a laboratory's technical competence, impartiality, and reliability.
NABL offers accreditation services in various fields such as testing, calibration, medical testing, proficiency testing, and reference material producer. The accreditation process involves a rigorous evaluation of the laboratory's management systems, technical competency, facilities, equipment, and personnel.
If you are looking for NABL accreditation services for your laboratory, you can call or write us to find more information about the accreditation process, eligibility criteria, and application procedure etc.
Current Transformers Calibration Services
View Brochure
Calibrated For | End User |
Location | Client Site |
Service Duration | 2 or 3 days |
Service Mode | Off Line |
Vernier Calipers Calibration
Minimum Order Quantity: 10 Piece
View Brochure
Service Location | all india |
Service Duration | 1 week |
Service Type | on site /lab |
Calibrating a vernier caliper is important to ensure accurate measurements. Here are the steps we follow to calibrate a vernier caliper:
-
Clean the caliper: Use a clean, dry cloth to wipe down the caliper to remove any dust, debris, or oil that may be present on the surface.
-
Zero the caliper: Close the jaws of the caliper and adjust the dial or thumb wheel until the reading is zero.
-
Check the calibration: Using a standard reference block or gauge block of known dimension, measure the block with the caliper. If the measurement matches the known dimension of the block, then the caliper is calibrated. If not, proceed to the next step.
-
Adjust the calibration: Using a small screwdriver or Allen key, adjust the calibration screw on the caliper until the measurement matches the known dimension of the reference block.
-
Verify the calibration: After making adjustments, measure the reference block again to verify that the caliper is now calibrated correctly.
-
Repeat if necessary: If the caliper is still not calibrated, repeat steps 4 and 5 until the measurement matches the known dimension of the reference block.
It is recommended to calibrate the caliper periodically to ensure accurate measurements.
Pressure Gauge Calibration Services
Minimum Order Quantity: 1 Piece
View Brochure
Service Location | all india |
Location | site |
Service Type | calibration |
Industry Type | all |
Calibrated For | Customer Requirement |
Number Of Pressure Gauges | 1 |
Calibration Interval | Yearly |
Pressure gauge calibration services are specialized calibration services that ensure the accuracy and reliability of pressure gauges. Pressure gauges are instruments used to measure pressure in a wide range of applications such as in industrial processes, pipelines, and laboratory equipment. Regular calibration of pressure gauges is essential to ensure that they are providing accurate and reliable measurements.
Pressure gauge calibration services may be provided by calibration laboratories or equipment manufacturers, and typically involve the use of precision instruments to compare the pressure gauge being calibrated to a known standard or reference device. The calibration process may involve a series of tests, measurements, and adjustments, and may take place on-site or at a calibration laboratory.
During the pressure gauge calibration process, the calibration technician will typically measure the gauge's accuracy at various pressure points, making adjustments as necessary to ensure that it meets the required accuracy standards. After calibration, a calibration certificate will be provided which documents the results of the calibration, including the measured values and any adjustments made to the device.
Accurate and reliable pressure gauge calibration services are important to ensure that pressure gauges are providing accurate and reliable measurements, which is critical to safety and the proper functioning of equipment. If you require pressure gauge calibration services, it is important to choose a service provider with the necessary technical expertise, experience, and accreditation to ensure that your devices are calibrated correctly and within the applicable standards.
Additional Information:
- Production Capacity: 1
- Delivery Time: 1 day
Gauge Calibration Service
View Brochure
Gauge calibration services are provided by calibration laboratories to ensure that gauges and measuring instruments are accurate and reliable. Calibration is the process of comparing a device's measurements against a known standard to determine its accuracy, and adjusting it if necessary to bring it back into compliance with the standard.
Gauge calibration services typically involve the use of precision instruments and equipment to perform measurements that are traceable to national or international standards. These services may include the calibration of a variety of gauges and measuring instruments such as pressure gauges, temperature gauges, torque wrenches, micrometers, calipers, and other similar devices.
During the calibration process, the calibration laboratory will typically provide a calibration certificate that documents the results of the calibration, including the measured values and any adjustments made to the device. This certificate provides assurance that the device is accurate and reliable, and may be required for regulatory compliance or quality control purposes.
If you need gauge calibration services, you can search for accredited calibration laboratories in your area or contact a calibration service provider directly. When choosing a calibration service provider, be sure to consider their accreditation status, technical competence, and experience in providing calibration services for the type of gauges or measuring instruments you need calibrated.
Torque Wrench Calibration Service
Minimum Order Quantity: 1 Piece
View Brochure
Service Location | all india |
Instruments To Be Repaired | No |
Service Charge | 1000 |
Location | delhi |
Duration | 1 |
Calibration Service Level | Certificate with Uncertainties |
Calibration Interval | Yearly |
Torque Wrench Type | Deflecting Beam |
Calibrated For | Manufacturer |
Number Of Units | 1 |
Additional Information:
- Production Capacity: 1
Sound Level Meter Calibration
Minimum Order Quantity: 1 Number
View Brochure
Mode Of Report | Hard Copy |
Service Charges | 1000 |
Industry Type | Engineering |
Number Of Sound Level Meters | 10 |
Location | site |
Maximum Sound Level | 140 dB |
Calibrated For | Customer Requirement |
Calibration Interval | Yearly |
Sound level meters are devices used to measure sound pressure levels in decibels (dB). Calibration of a sound level meter is important to ensure that it provides accurate and reliable measurements. Here are the steps to calibrate a sound level meter:
-
Prepare the sound level meter for calibration. Make sure the battery is fully charged, and the device is functioning properly. Remove any protective covers and attachments.
-
Select a suitable calibration source. The calibration source should produce a stable and known sound pressure level at a specific frequency. The calibration source can be a sound calibrator or a reference standard.
-
Mount the sound level meter on the calibration source. Attach the sound level meter to the calibration source using a mounting adapter or magnetic base. Ensure that the sound level meter is securely attached and properly aligned.
-
Set the calibration frequency and sound pressure level. Set the calibration frequency and sound pressure level to match the specifications of the sound level meter. Use a sound generator or a computer program to generate the desired signal.
-
Record the readings from the sound level meter. Turn on the sound level meter and record the readings from the device. Take multiple readings at different frequencies and sound pressure levels to ensure accuracy. Repeat this process several times to obtain a reliable average value.
-
Analyze the data. Compare the readings from the sound level meter with the calibration source readings to determine the meter's accuracy. If the readings are not consistent, adjust the sound level meter or replace any components that may be causing the discrepancies.
-
Document the calibration. Record the calibration results, including the calibration source used, the frequency and sound pressure level settings, and the sound level meter readings. Document any adjustments made to the sound level meter.
By following these steps, we calibrate a sound level meter and ensure its accuracy. Regular calibration is necessary to maintain accurate readings and detect any errors or problems with the sound level meter
Additional Information:
- Item Code: SLM
- Production Capacity: 100
- Delivery Time: 2 week
- Packaging Details: Wooden
Energy Meter Calibration Services
Minimum Order Quantity: 1 Number
View Brochure
Service Location | on site |
Instrument Type | Energy Meter Calibration |
Service Charge | 1000 |
Service Type | Calibration |
Industry Type | Industry |
Energy Meter Type | Electronic |
Calibrated For | Customer Requirement |
Calibration Interval | Yearly |
Number Of Energy Meters | 1 |
Energy meter calibration is the process of verifying the accuracy of an energy meter, which is a device that measures the amount of electrical energy consumed by a home or building. Over time, energy meters can become less accurate, which can result in overcharging or undercharging of electricity bills. Calibrating energy meters helps to ensure that the meter is measuring electricity consumption accurately, which can help to prevent billing errors and ensure fair billing.
The calibration process typically involves comparing the readings of the energy meter with a known standard, such as a reference meter or a laboratory standard. The energy meter is then adjusted or corrected to align its readings with the reference standard. This process is often carried out by a qualified electrician or a specialized calibration service provider.
Energy meter calibration is usually required on a periodic basis, depending on the type and model of the meter, and local regulations. Some energy meters may need calibration every few years, while others may require calibration more frequently. Regular calibration of energy meters helps to ensure accurate billing and can also help to detect potential issues with the energy supply or electrical system.
In summary, energy meter calibration is an important process that helps to ensure the accuracy of energy meters and prevent billing errors. It is typically performed by qualified professionals using specialized equipment and standards, and may be required on a periodic basis depending on the type of meter and local regulations
-
Preparation: Make sure the energy meter is properly installed and connected to the power source. Ensure that all the necessary equipment, including calibration equipment, is ready and functioning correctly.
-
Verify the Meter: Verify that the meter is functioning correctly by checking its reading against a known source of energy, such as a calibrated reference meter. If the meter is reading correctly, proceed to the next step. If not, repair or replace the meter.
-
Adjust the Meter: Using the calibration equipment, adjust the meter's calibration settings to match the known energy source's output. The calibration process may involve adjusting the meter's voltage or current settings, depending on the type of energy being measured.
-
Repeat the Test: After the meter has been adjusted, recheck its reading against the known energy source to ensure that the calibration has been successful. Repeat the calibration process if necessary.
-
Record the Results: Once the calibration is complete, record the meter's reading and the calibration settings for future reference. This information can be used to verify the meter's accuracy in the future.
-
Certify the Calibration: If required, have the calibration certified by a qualified calibration lab to ensure that the meter is within acceptable accuracy limits. This certification may be required for legal or regulatory purposes.
Additional Information:
- Item Code: EMCS
- Production Capacity: 1
- Delivery Time: 1 WEEK
- Packaging Details: WOODEN
Medical Equipment Calibration Service
Minimum Order Quantity: 1 Instrument
View Brochure
Service Location | all india |
Location | Delhi |
Accreditation | NABL |
Service Type | calibration |
Service Duration | 1 day |
Service Mode | At site |
Medical equipment calibration service is a process that ensures medical devices are accurate and reliable in their performance, thus helping to ensure patient safety. The calibration of medical equipment is a critical component of quality assurance programs, which help to ensure that medical devices are working within acceptable levels of accuracy and precision.
Medical equipment calibration services may be provided by calibration laboratories, biomedical engineering departments, or equipment manufacturers. The service may involve calibration of a wide range of medical devices, such as blood pressure monitors, thermometers, infusion pumps, ECG machines, and other similar devices.
During the calibration process, the medical equipment is compared to a known standard or reference device, and adjustments are made if necessary to bring the equipment back into compliance with the standard. Calibration may involve a series of tests, measurements, and adjustments, and may take place on-site or at a calibration laboratory.
Accurate and reliable medical equipment calibration services are critical to the safe and effective use of medical devices in patient care. If you require medical equipment calibration services, it is important to choose a service provider with the necessary technical expertise, experience, and accreditation to ensure that your devices are calibrated correctly and within the applicable standards.
Additional Information:
- Production Capacity: 1
Measuring Instruments Calibration
Minimum Order Quantity: 1 Instrument
View Brochure
Calibrated For | Industrial |
Number Of Instruments | 1 |
Mode Of Report | Hard Copy |
Industry Type | all |
Measuring Instrument Type | Balances |
Instrument Type | All |
Calibration Interval | Yearly |
Calibration Service Level | Certificate with Uncertainties |
Usage/Application | Industrial |
Preferred Measuring Type | Metric |
Measuring instruments calibration is the process of comparing the measurements of a device against a known standard or reference, and making adjustments if necessary to ensure that the device is accurate and reliable. Calibration is an important aspect of quality assurance programs, and is necessary to ensure that measurements made by the device are accurate and reliable.
Measuring instruments calibration services may be provided by calibration laboratories or equipment manufacturers, and may include the calibration of a wide range of measuring instruments such as gauges, thermometers, flow meters, weighing scales, and other similar devices.
During the calibration process, the measuring instrument is compared to a known standard or reference device, and adjustments are made if necessary to bring the instrument back into compliance with the standard. Calibration may involve a series of tests, measurements, and adjustments, and may take place on-site or at a calibration laboratory.
Accurate and reliable measuring instruments calibration services are important to ensure the correct functioning of the measuring instruments, and to ensure that they are providing accurate and reliable measurements. If you require measuring instruments calibration services, it is important to choose a service provider with the necessary technical expertise, experience, and accreditation to ensure that your devices are calibrated correctly and within the applicable standards.
Thermal Instruments Calibration Service
View Brochure
Certified | NABL |
Service Mode | Off Line |
Service Duration | 2 or 3 days |
Location | Client Site |
Acknowledged as a pioneer organization of the business industry, we are affianced in providing Thermal Calibration Services. With our experienced team, we cater to the demands of our clients. Apart from this, we are offering this thermal calibration service range at the budget-friendly market price.
Utm Machine Calibration Services
Minimum Order Quantity: 1 Instrument
View Brochure
Service Location | At Site or In Lab |
A Universal Testing Machine (UTM) is used to test the mechanical properties of materials such as tensile strength, compression strength, bending strength, and shear strength. Calibration of the UTM is essential to ensure that it provides accurate and reliable results.
Here are the steps we follow to calibrate a UTM:
-
Prepare the UTM for calibration. Make sure that the UTM is clean, properly lubricated, and free of any debris that may interfere with the accuracy of the readings.
-
Select a suitable calibration standard. The calibration standard should have a known and traceable value for the property being measured, such as force, displacement, or strain. The calibration standard should be of a similar material to the test sample and be within the range of the UTM's capabilities.
-
Install the calibration standard. Follow the manufacturer's instructions to install the calibration standard onto the UTM. Ensure that the standard is aligned properly and securely fastened.
-
Perform a zero-force calibration. Set the UTM to the zero-force setting and check that the force reading is zero. If the reading is not zero, adjust the UTM accordingly.
-
Perform a calibration at a known force or displacement. Apply a known force or displacement to the calibration standard and record the readings from the UTM. Take multiple readings at different force or displacement levels to ensure accuracy. Repeat this process several times to obtain a reliable average value.
-
Analyze the data. Compare the readings from the UTM with the known value of the calibration standard to determine the UTM's accuracy. If the readings are not consistent, adjust the UTM or replace any components that may be causing the discrepancies.
-
Document the calibration. Record the calibration results, including the calibration standard used, the force or displacement levels, and the UTM readings. Document any adjustments made to the UTM.
By following these steps, you can calibrate a UTM and ensure its accuracy. Regular calibration is necessary to maintain accurate results and detect any errors or problems with the UTM
Additional Information:
- Item Code: UTMC
- Production Capacity: 10
- Delivery Time: 2 weeks
- Packaging Details: wooden
Mechanical Dimensional Calibration Services
View Brochure
Instrument Type | Laboratory Instrument |
Calibration Interval | 6 Months |
Calibrated For | Customer Requirement |
Service Location | Pan India |
Service Mode | Off Line |
Service Duration | 2 or 3 days |
With the high support of professionals, we are providing Mechanical Dimensional Calibration Services to our customers. These calibration services are rendered with the following industry standards. Together with this, offered calibration services are executed by experienced and knowledgeable persons.
Multimeter Calibration Service
View Brochure